Call today itself
 

Installation Procedures for Mounting Your Hurricane Panels


The follow pictures depict a typical hurricane shutter installation from start to finish.
 

 
Pre-drill starter holes in H-Header
 
Pre-drill starter holes in F-Track
Lining Up H-Header to Top of Window Drilling holes for the H-Header
Your H-header comes pre-cut to fit your window.
 
Drilling the first hole for the H-Header
Drilling in the First Tapcon Screw Leveling the H-Header
Drilling in the first Tapcon Screw
 
Leveling the H-Header and Drilling the remaining holes.
Drilling the Last Hole Completed H-Header
Drilling the last Hole in the H-Header
 
Completed H-Header
Lining up the F-Track Drilling the First Hole in the F-Track
Lining up the F-Track
 
Drilling the First Hole in the F-Track
Drilling the First Tapcon in the F-Track Leveling the F-Track
Drilling the First Tapcon in the F-Track
 
Leveling the F-Track
Drilling Tapcons into the F-Track Finishing the F-Track
Drilling Tapcons into the F-Track
 
Finishing the F-Track
Sliding the mounting screws Putting up the Panels
Sliding the Mounting Screws into
the F-Track
Putting the Panels into place
Wingnuts secure the panels in place Panels overlap each other
Wing nuts secure the panels in place
 
The Panels overlap each other across the window
Securing the last wingnut The finshed window!
Securing the last Wingnut Finishing the Window

Contact Us Today for a FREE Hurricane Shutter Quote!

Call us to order today at our South Florida Headquarters: (954)474-3557

Visa Mastercard Electronic Checks

<< Back to Home Page

 
arrow
TESTIMONIALS


David G. - July - 2018 - Sarasota, Florida

We wanted to self-install so we bought accordions and roll downs from Empire Construction.  We measured our window and patio and sent Empire the specs.  The shutters were an exact match.  Installation is very doable for two reasonably mechanical people.  In this case it was only one mechanical person and some extra hands. The accordions were a breeze as installation was mostly marking holes for spots, drilling holes, and screwing them in.  Our accordions have locking pins that hold them open and act as a second lock when closed. Even if a projectile breaks the lock the rods will keep the shutters closed.  These shutters are Bertha HV1. They are High Velocity Hurricane Zone Approved. Having seen a wide range of shutters we are extremely happy with the quality of the product we received!!


Jim J. - June - 2018 - Homestead
, Florida

I installed fourteen aluminum accordion shutters which I purchased from Empire Construction.  I could not be happier with my choice.  The shutters are made very well and are powder-coated.  The purchase included all of the required hardware which was powder-coated to match the shutters.
  The company is very customer-oriented.  Michael and his staff were wonderful.  They were attentive, helpful, and a delight to work with.  The installation video on the website made the installation  very easy. I highly recommend Empire Construction to anyone considering a purchase of hurricane shutters.  Thanks again.  Please say Hi to everyone,

 

arrow
PRODUCTION TIME
Accordions : 7 - 8 Weeks
Bahamas & Colonials : 10-12 Wks
Clear Panels : 3 - 4 Weeks
Hurricane Fabric : 5 - 6 Weeks
Rolling Shutters : 10 Weeks
Storm Panels : 3 - 4 Weeks

 

 


 

  Hurricane Shutters made in the USA

Finance Your Shutters with PayPal!



ABOUT SSL CERTIFICATES